OEM & custom
Built to your specification
Our core business is OEM and contract production. Tell us your sizes, colors, locks, and branding, and we build lockers to your specification, to our own quality standards.
What you can customize
Size and configuration
Dimensions, number of compartments, tiers, and layout to fit your space.
Color
Any RAL color, gloss or matte. See our standard colors.
Locks
Padlock hasp, key (cam), or electronic locking. Single-point or three-point.
Hardware and accessories
Hanging rails or coat hooks, benches, sloping tops, plinths, number plates, and ventilation.
Steel thickness
From 0.50 to 0.90 mm, where the size and capacity of a model allow it.
Branding
Your logo as private label, by stamping, sticker, or metal badge.
How OEM works
We design and produce to our own standards. Send a drawing, a sample, or just a description of what you need, and we'll advise on the best build, confirm the specification with you, and produce it under our own quality control.
The design, the drawings, and the technical specification are ours, down to the steel grade, the thickness, and the coating. Nothing goes into your order that we have not specified and approved. Production runs on dedicated lines in Istanbul under our supervision, and we inspect every order before it is loaded. You can appoint SGS, Bureau Veritas, or any third party you trust to carry out a pre-shipment inspection at your own cost. More on how we work is on our About page.
There's no minimum order, apart from private-label branding that needs a one-off setup, and you can order a sample first. For full ordering terms, see Export & logistics.
Custom steel
A steel locker is built to the job. Compartment count and layout, door type, lock, color, feet, shelves, rails, and hooks are all set per order. Steel thickness runs from 0.50 mm to 0.90 mm.
The widest we can build is 1350 mm. Height goes up to 2200 mm and depth up to 800 mm. Width is the binding limit, not height, which is the opposite of what most buyers expect. Locker bodies hang horizontally on the coating line we use, so anything wider will not pass through and will not turn. Height is not a problem for the same reason, and a locker 2200 mm tall is fine.
At depths around 500 mm and above, a full hanging rail can replace the coat hooks.
There are things we will not do. A 1.5 mm thickness is not suitable for the spot-welded construction we use. Anything wider than 1350 mm will not go through the coating line. Where a request does not suit a locker build, we say so and suggest a medium-duty shelving option rather than force it.
Custom wood
Wood works differently from steel. There is no fixed model list, so every unit is made to the specification of your project.
The internal layout is set to the job. Shelves, hanging rails, glass or plexiglass doors, and open and closed combinations in one unit are all specified per order.
Standard decors are maple, white, oak, and walnut. Send a reference for anything else and we find the closest available match, then confirm it with you before anything is cut. Doors can mix decors within one unit.
Standard sizes are 80, 115, and 185 cm tall, 40 or 80 cm wide, and 36 cm deep. Custom sizes are made to order.
On an 80 cm unit the back panel can be a single piece or two 40 cm pieces joined with a plastic connector. The two-piece back lets a flat-packed unit pack smaller, which is a real freight saving on volume orders.
Private-label branding
We can produce lockers under your own brand. How branding is priced depends on the method you choose.
Embossed or stamped
Pressed into the steel, so it cannot be scratched off and it survives repainting. There is a one off setup cost for your logo, and a minimum quantity.
Sticker or metal badge
Charged per part, and on larger quantities that cost may be waived.
Send us your logo and the finish you want, and we'll recommend the most cost-effective option.
Send us your specification
Share your sizes, quantity, color, lock, and any branding, and we'll advise on the best build and prepare a quote.
Get a quote